The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Outside Is Where We Thrive – Summer

March 2009 Issue

Grooming Vehicles 2009

While nothing earth-shattering was introduced this year in grooming vehicles, some tweaks and improvements will be noticeable on the slopes.

After last year’s introduction of major new machines from Prinoth and PistenBully and the arrival of the Ohara 357, grooming vehicles for 2009 are mostly seeing refinements. Which is not to say that there’s nothing happening—quite the contrary. Here’s what they have in store.

PRINOTH
The Pininfarina-designed, Caterpillar-built cab now featured on the Bison, Bison X, and Bison Winch is the big news from Prinoth. Pininfarina has designed interiors and exteriors for vehicles such as Ferrari and Maserati and for powerboats and airplanes and now for Prinoth groomers.

Pininfarina conceived the cab using a virtual reality system; this helped get the design right more quickly and cut development and production time by two years, according to Western sales director Greg Clowers.

Making a mockup revealed that Pininfarina got just about everything right except seat placement. The prototype started with a center position, but for North American models it ended up eight inches left of center, so that the operator can see the tiller more easily. “In the Bison X, the terrain park version, the seat has a three-degree swivel for even better visibility to the rear,” Clowers says.

The new cabs debuted in Italy last year, to favorable reviews. For the U.S., though, Prinoth has made a few modifications. Biggest is lower doors, so that drivers can see the outside of both tracks. Second, the mirror placement and size have been tweaked.

In addition, Prinoth has gone to the CAN bus system, making it easier to troubleshoot. The system also tracks tilling time and general usage, which helps area managers track overall efficiency and improve fuel useage.

To boost productivity, Prinoth adopted a new joystick design that allows the operator to the use blade and tiller at the same time. “The goal is total utilization, providing top performance in both park and slope grooming,” Clowers says.

Looking to the future, Prinoth is working with the California Air Resources Board to meet Tier IV engine requirements. “Prinoth is starting to test Tier IV engines with a goal of meeting the 2011 deadline for manufacture and sale and could have working test machines by the fall of this year,” Clowers notes.

Prinoth has also purchased the production factory from Camoplast, moving this back under Prinoth management. The purchase includes the utility and maintenance machines that Camoplast was making for the oil, natural gas, and utility industries.

One last bit of news: Prinoth has opened its new shop in Grand Junction, Colo., which also serves as the central distribution point for parts in the West. “In this economy, we’re proud to work with a company that sees the need to move forward,” Clowers says. The new facility will also build components for wind energy and mass transit systems. “This is an investment now that will pay dividends down the road,” he adds.

Advertisement

Commerce B

PISTENBULLY
Introduced late last year, the PistenBully 400 has received positive reports from the field “on all fronts, from handling and performance to horsepower, agility in the park, ride comfort and visibility,” says marketing VP John Glockhamer. The Cummins QSL 9 engine with its Tier III rating has so far lived up to its billing.

Model configurations include the 400 Park for terrain park grooming, and the 400 W winch for steep slope grooming and snow management.

In addition, “the customer has his choice of sticks or wheel for steering control. This is a plug and play option,” Glockhamer says. Another choice is the option of rear deck for cargo transport or no deck for greater visibility to the rear when grooming. Two types of tracks are offered, steel or the high performance combi track.

Tiller choices include the Z Flex, MultiFlex, or the new AlpineFlex. New to North America this season, the AlpineFlex has several features that set is apart from the standard MultiFlex tiller, including lower overall weight due to the lighter weight framework and a completely new tooth configuration for the cutter bar. “The result is better snow processing with enhanced efficiency,” Glockhamer says.

“Lately it seems too much emphasis is placed on the cosmetic appearance of the finished snow surface,” Glockhamer adds. “Corduroy is nice, but at the end of the day it’s the quality of the tilled snow that the skier or rider feels beneath his skis and board. We believe this is the overriding criteria when measuring tiller performance.”

Sign in or enable JavaScript to keep reading.

Advertisement

Pro Deals Square

Advertisement

Pro Deals Billboard