The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Prinoth Connect Snow Measurement – Leaderboard

September 2015 Issue

Problem Solving

It takes creativity to find solutions when working with an orphan ski lift.

If you have an orphan ski lift, and have had a component parts problem or failure, you most likely know what it’s like to exhaust your sources for solving the problem. But even then, there are solutions.

First, let’s define an orphan lift: it’s one that is no longer supported by a manufacturer or service company. If a manufacturer or owner of a present ski lift company provides engineering assistance for problem solving, if the company provides as needed service bulletins and replacement parts as well as older parts, then the lift is not an orphan. There are some lifts for which companies may sell parts but don’t provide the level of service described above; I consider these lifts orphans as well.

How can you solve problems with an orphan? Let’s examine a problem that happened several years ago with one such lift: worn splines on a spline shaft, and worn teeth on the internal flex coupler. All needed to be replaced (see photo).

The issue is, where do you find the replacement parts to comply with the original OEM specifications? The original manufacturer is no longer in business. There is no parts warehouse to call.

Here’s how the ski area sought the replacement parts.

❶ They called neighboring ski areas that have similar equipment, to ask for assistance in finding these parts. Networking with your neighbors is always a good place to start.

❷ A computer-savvy individual did a Google search for replacement parts. Typically, if you look closely at these component parts, you can find some part numbers, even a manufacturer’s name, and usually their own stamped part numbers. These can be searched.

On a Google search you can usually find a tab that says, “suppliers.” They all have phone numbers and web sites. And they want to sell. Suppliers can be a good source of information—and solutions.

Advertisement

Climb Zip Whip Leaderboard

❸ The ski area also took the component parts to a local machine shop, one state away, and asked for assistance. That can be a great source of information, too. If it’s a shop that has been in the business for a few years, it’s quite possible they will know where to find the component parts. They may even have them in stock.

❹ They called current lift manufacturers. Their parts supply staff have often run across these parts problems also. The manufacturers often receive requests for assistance from other ski areas; even if they do not carry the particular part, they may know where to find them.

❺ They called their favorite ski lift consultant. Consultants may know how these parts can be obtained.

Sign in or enable JavaScript to keep reading.

Advertisement

Commerce A - Billboard