The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Terra Nova – 728×90

March 2020 Issue

Understanding Ball and Roller Bearings

Cleanliness and good fits are critical to the life of  your bearings.

mar20 bearings 01

 

mar20 bearings 01Figure 1: Here are cross-section views of three of the more common bearings. From top to bottom, they are a deep-groove ball bearing, an angular contact bearing, and a tapered roller bearing. There are many other “rolling element” bearing designs, but they all share some common features. Bearings play a key role in many of our machines, and some require more attention than others. For example, almost anyone can replace slow moving and lightly loaded ball or roller bearings, such as the ones on the sheave wheels of a 1960s double chair. These bearings last a good eight years or so (or longer if fit well) because they were designed when the safety factors were much higher and the allowable bearing loads lower. But replacing a motor bearing or reducer bearing in that lift is a different story. The loads are higher, and the tolerances tighter. The person responsible for that should understand both how ball and roller bearings really operate and the need for careful installation. That especially includes understanding why those higher-speed and more heavily loaded bearings need the proper fit dimensions.

Bearings Go Way Back
The basic idea of ball and roller bearings has been around for thousands of years. Ancient people moved huge stones on rollers made from tree trunks. Some sort of rolling-element bearings have been used on water wheels and at the base of windmill posts for centuries. Modern bearings are a recent development, though: It wasn’t until 1798 that a patent for a ball bearing was issued to a Welsh inventor.

Sign in or enable JavaScript to keep reading.

Advertisement

Commerce B