The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Outside Is Where We Thrive – Summer

July 2010 Issue

Keeping It Safe

With a little forethought and planning, on-the-job safety can become second nature for employees.

Maintenance staffs require a wide range of skills to provide the level of service and reliability that guests expect. Your maintenance staff have to be on target, all the time. Every assignment must be done right, every activity must be done when required, and mistakes are simply not an option. To approach this ideal, they need a solid system of procedures—and a commitment to follow them.

The obstacles are many. Maintenance mechanics may or may not have formal trade training (millwrighting, welding, and electronics to name a few). The nature and location of the work further complicate maintenance activities. Given the unique demands of the work environment, maintenance staff must use the best available processes and procedures to ensure that their work is done to the highest possible standard and in the safest possible manner. What they need, in short, is a state-of-the-art maintenance worker protocol.

As a manager, your goal is to provide the tools your mechanic teams need, develop a safety culture by promoting proper ways of working, and then employ advanced technology and teamwork to really make their operations safe and productive.

THE GOOD OLD DAYS ARE GONE
Does the following scene sound familiar?

The radio says there’s a ground fault on tower 7 of the main lift, and the lift is down with a line of full chairs. Knowing that it’s cold and dark, and that the likely cause is a broken brittle bar, you jump on a sled with wrenches and a spare brittle bar in hand. With all those guests in the air and getting cold, you scramble up the tower and proceed to the lead-in sheave switch set. You quickly diagnose the problem, confirm your assumption, and replace the switch. Then you settle in on the tower head to observe operations; after about 20 minutes, as the cold settles in, you deem the repair a success, and descend the tower. Then you bomb back down the hill to the safety and comfort of the maintenance shop to warm up and move on to the next task.

That’s how it was in the good old days. In today’s safer world, the same scenario might play out as follows:

The radio says there’s a ground fault on tower 7 of the main lift and the lift is down with a line of full chairs. Knowing that it’s cold, dark and that the likely cause is a broken brittle bar, you prepare your personal protection equipment (PPE) for working at heights, call for another mechanic to support you on the repair from the ground or the operator station, make sure your radio batteries are charged, and safely access the tower with the support of other safety pros on the hill. You climb the tower ladder, using a safe climbing technique. Then you tie off 100 percent to prevent an accidental fall, and anchor yourself to a suitable location on the tower head. You quickly diagnose the problem and confirm your assumption.

Advertisement

Prinoth Snow Measurement - Billboard

You then call your support to lock out the lift and confirm it cannot be started without your command, to allow reasonably safe access to the sheave train and to replace the switch. A radio communiqué between your position and the operator station verifies the repair while you are in position, before the lift is re-started, and the radio call confirms you are safely away from the hazards of the operating machine before the lift is re-started. You settle in on the tower head to observe operations; after about 20 minutes, as the cold settles in, you coordinate with other professionals on the team to confirm the success of the repair and descend the tower, again using a safe climbing technique, and 100 percent tie off. Later, you regroup with the team to debrief and document the repair, to understand the cause of the problem to devise a plan to prevent its future occurrence.

IN WITH THE NEW
We used to take so many chances for the benefit of our patrons. Fortunately, we now have better personal protective equipment, protocols and procedures today. And we know that it’s worth using these, for our own safety. It won’t hurt the guests if it takes us a few minutes longer to do the job the right way.

Oh, and it’s also required by government regulations.

Sign in or enable JavaScript to keep reading.

Advertisement

Climb Zip Whip Leaderboard