The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Outside Is Where We Thrive – Summer

May 2011 Issue

Pay Now or Pay Later

Summer maintenance can save time and money and shrink the to-do list for opening next fall.

Now that the ski season has ended, it’s time to tend to some of your key assets: your capital equipment. Ski lifts, snow cats, snow guns, compressors, and other gear need proper care and maintenance. Performing it can save money and make the next season’s opening a little less stressful.

“All these elements have to work. If they all work 100 percent, you will have a successful ski resort,” notes Tom Fillmore, an SMI field service technician.

Manufacturers’ maintenance schedules and checklists are a good place to start. For example, Leitner Poma lists schedules for daily, weekly, monthly, semi-annual and annual procedures. Separate schedules are provided for mechanical and electrical components. Tom Clink, sales manager, advises, “Even in the summer months when the resorts are not running the systems, these procedures are still important to do.”

Clink suggests that paying attention to everyday details can avoid major repair issues later on. “As you are cleaning and wiping equipment off, you will be looking at that closely and be able to notice a leak or crack or something that indicates a problem. It’s absolutely critical to keep an eye on things. By inspecting the system you can address the problem early and plan your summer maintenance schedule,” he says.

LIFTS
Rick Swanker, director of mountain operations at Grand Targhee, says, “The lifts are our main focus. We concentrate on making sure all the lifts will run when we open, and run all winter without any problems. (For more details on key items, see “Give Your Lifts a Hand,” page 18.)

Clink recommends disconnecting power switches on lift towers to prevent potential damage from summer lightning strikes. He says, “That will save a lot of time, trouble and headaches. Newer systems have better grounding, but lightning can be a strange thing.”

Even non-mechanical elements like padded lift seats need attention. Keep seat pads out of the sun to prevent fading and deterioration from the sun’s ultraviolet rays.

GROOMERS
Grooming equipment is built for heavy lifting, but it still benefits from some TLC in the off season. Grand Targhee cleans and covers its snow cats at the end of the season. Maintenance routines are scheduled for late summer and early fall.

John Glockhamer, marketing manager, Kässbohrer, says resort staff mechanics may not be able to make extensive repairs, but they can certainly change the oil and filters and do basic service maintenance. Both PistenBully and Prinoth offer service schools in the summer where operators can learn how to make repairs and troubleshoot.

One routine repair, Glockhamer notes, is replacing the cutting teeth on the tiller. Rotating at 1000 rpm and cutting the snow constantly, the teeth might nick a rock or otherwise become damaged. Glockhamer says that repairs can be made to the individual tooth or by replacing a complete shaft.

Prinoth offers a complete service guide specific to summer maintenance, says after-sales service manager Philippe Masse. The guide includes checklists to ensure that all maintenance items are covered, from hydrostatic systems and gearboxes to lift frames and suspensions.

It’s best to act sooner rather than later, too. Prinoth recommends doing seasonal maintenance, such as greasing and oil changes, as soon as possible after the season ends, to eliminate any contamination in the fluids or bearings (for example, water in wheel or tiller bearings). Specific rotating parts, such as drive sprockets and final drive, can also be interchanged to extend their life. To prevent damage to batteries, remove them from groomers and keep them in a fully charged condition, topping up the charge periodically as needed.

And finally, “Vehicles should be tested after the seasonal maintenance to make sure they are ready for the following season,” Masse says.

Sugarloaf begins its groomer maintenance even before the seasons ends. Rich “Crusher” Wilkinson, VP of mountain operations, explains: “As we get into late March and April, we start to take groomers off line. We take the tracks off, roll them up and cover them so they aren’t exposed to UV light all summer long, and schedule maintenance even before we close the resort. We go through them pretty thoroughly, and we’re getting longer useful life out of the equipment than we were 10 to 15 years ago.”

Advertisement

Marketing B - Billboard

GROOMER TRACKS
Bill Moss of Hall USA provides the following advice on track maintenance:

• Remove the tracks to allow the belts to relax and reduce the stress caused by being under tension.

• Cover tracks to prevent sun damage.

• Mark the tracks with a grease pencil to identify which groomer they came from, and from which side.

• On aluminum tracks, mark the direction of rotation, as aluminum tracks should always run in one direction to reduce the chance of breakage.

• If tracks show damage, check to see if it was caused by other problems on the groomer, such as bent or damaged components or misalignment of cracked or broken frame structure.

• Prior to storage, determine what parts you will need for repairs, rebuilding, or replacement.

• Inspect tire-guides for sharp edges that could cause tire damage.

• Inspect backing-plates for damage and replace as needed.

Sign in or enable JavaScript to keep reading.

Advertisement

Commerce B