The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Prinoth Connect Snow Measurement – Leaderboard

January 2014 Issue

Remote Control of Lifts

Modern communications have made remote operation of lifts much easier. But that's no excuse for taking it for granted.

Operating a chairlift has become a much simpler task since the first lifts were invented in the early 1930s. But that doesn’t mean operators can run their machines without a care in the world. Despite all our advances, there’s no way to get around Murphy’s Law: Things can always go wrong, and when you least expect it.

The earliest rope tows were developed in the eastern U.S. They consisted of a farm tractor converted to a stationary engine located at the top of the ski hill, driving a rope strung around a pulley at the bottom of the hill and looped around one of the tractor’s drive wheels. The “operator” was close by the engine, and the ignition of the gas engine was run a short distance to the “safety gate,” now known as the “stop gate.” That was the sole means of stopping the lift. If extending the ignition circuit to the bottom of the lift for remote stopping was ever tried, that evolutionary step has been lost to time. It is highly doubtful that it was tried, and even if it was, the results would have surely been poor—that circuit was never intended to see the line loss of perhaps 1,000 feet of wire or more.

Sign in or enable JavaScript to keep reading.

Advertisement

Prinoth Snow Measurement - Billboard