The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Prinoth Connect Snow Measurement – Leaderboard

Fall 1978 Issue

Rope Alignment

Did Someone Mention "ALIGNMENT"? Yep, we said it, then we listened and yawned while everyone from the ticket sellers to the summertime fence builders put in their two bits worth. Did you notice how the good mechanics tended to sit back and do more listening than talking?

Whether it be a two wheel sheave train or a combination of a four, six or eight wheels, the misalignment shown in the drawing above tells you the direction the wire rope will twist. If you have more twist than you can tolerate within your wire rope, then check and see if the crossarms are level, sheaves are perfectly plumb, line gauge is correct and rope is riding true on the sheaves. If you still have twist in the wire rope, it would be well to refer to the above drawing and purposely misalign the sheave train a minute amount to neutralize the twist. We are also assuming the bottom and the top terminal are all in alignment. (Illustration by Buck Sesaki, Alta, Utah.)
Whether it be a two wheel sheave train or a combination of a four, six or eight wheels, the misalignment shown in the drawing above tells you the direction the wire rope will twist. If you have more twist than you can tolerate within your wire rope, then check and see if the crossarms are level, sheaves are perfectly plumb, line gauge is correct and rope is riding true on the sheaves. If you still have twist in the wire rope, it would be well to refer to the above drawing and purposely misalign the sheave train a minute amount to neutralize the twist. We are also assuming the bottom and the top terminal are all in alignment. (Illustration by Buck Sesaki, Alta, Utah.)
Whether it be a two wheel sheave train or a combination of a four, six or eight wheels, the misalignment shown in the drawing above tells you the direction the wire rope will twist. If you have more twist than you can tolerate within your wire rope, then check and see if the crossarms are level, sheaves are perfectly plumb, line gauge is correct and rope is riding true on the sheaves. If you still have twist in the wire rope, it would be well to refer to the above drawing and purposely misalign the sheave train a minute amount to neutralize the twist. We are also assuming the bottom and the top terminal are all in alignment. (Illustration by Buck Sesaki, Alta, Utah.)

We are talking, of course, about rope to tower sheave and bull wheel alignment where the provisions for making adjustments are sometimes crude or inadequate, and the gauging techniques tricky and not well understood.

More From This Issue

Advertisement

MDMT – Card

Advertisement

Prinoth Snow Measurement - Billboard