The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Pro Deals Leaderboard

Fall 1978 Issue

Safety Control Circuits

What constitutes the safety control circuit of a chairlift? What criteria must it meet? What safety capabilities should it provide? What other functions are desired for these systems to perform efficiently and reliably?

Base Station of type described

It is the intent of this article to explore these specific questions. The answers are of crucial importance to the owner-operator of any lift to be able to reap the desired service from the lift. The subject will be examined from the basic code requirements on up.

In the United States, the minimum basic design requirements for a chairlift safety system are generally adopted from the ANSI B-77-1 Standard Safety Requirements for Aerial Passenger Tramways. We therefore turn to this standard for a definition of the “safety control circuit” for any lift. Alas, we find that there is, in fact, no such animal as the frequently called “safety circuit;” there are, however, close cousins. The 1978 addendum to the standard has, for the first time, seen fit to define the “Electrical Control Circuits” for lifts and tramways. Two alternate circuits are now officially defined under the new Section 1.8.12, as the “Emergency Stop Circuit” and the “operating control circuit.” The “Emergency Stop Circuit” is thus defined as “an electrical control circuit that when interrupted will automatically cut the motive power and apply breaking to stop the tramway . . .” The operating control circuit is defined as an “electrical control circuit that governs starting, speed and normal stopping of the tramway.” Although not clearly delineated in the Standard, the “operating control circuit” is basically the “manual” control circuit as defined in Section 2.1.9.5, stipulating that on any lift which has only a simple stop circuit, such circuit shall be classified as the “emergency stop circuit.” This discussion will therefore concentrate on the problems/solutions related to the “emergency stop circuit,” as the chairlift safety circuit is now officially referred to, although many aspects of the subject may also apply to the so-called “operating control circuit.”

More From This Issue

Advertisement

Marketing B - Card

Advertisement

Marketing A - Billboard