The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Mountains Don’t Move Themselves

January 2009 Issue

Playing it Safe

OSHA may be coming to a ski area near you: yours.

As the NSAA Capital Watch has pointed out, ski areas have made it onto OSHA’s 2008 inspection list. Ski areas rose to the list after being identified as a High Hazard Area. However, inspections may also occur because of employee complaints, a major accident that is reported in the media, or a fatality or incident where three or more employees are hospitalized. There is nothing you can do at this point to avoid the inspection.

Inspections are unannounced. In fact, it is a crime to give a workplace advance notice of an inspection. So someday you may be surprised to find an OSHA compliance officer standing in your office.

The first step is to be polite. Although this is largely an adversarial relationship, you will learn more and protect yourself by responding in a courteous manner. Invite the inspector into your office, offer him coffee, get your pad and pencil. Start by creating a relationship.

Next, get on the phone and call your OSHA compliance officer. This is probably your risk manager or your workers’ compensation manager. You may also want to call your attorney. Ask the OSHA inspector to wait for any discussions until both of these people show up. OSHA inspectors will normally wait for a reasonable length of time.

Your OSHA compliance officer, before meeting you, can notify department heads that an inspection may be coming. This will give them at least some time to get their operations in order.

Ask to see the inspector’s credentials. Do this by exchanging a business card. If the person in front of you cannot show you proper credentials, ask them to leave and come back when they can. Make sure you have contact information before your meeting is over.

Next, try and determine why the inspection is being done. If the inspection is based on an employee complaint, you have the right to see the complaint. (The name of the employee who complained will not be revealed.) Finding out how the inspection was triggered will help you to informally narrow the inspection. You can negotiate and agree with the inspector on what points or issues will be covered. At a later point, if the OSHA inspector wants to broaden the inspection, a reminder of your agreement over the scope of the inspection will usually steer the inspection back.

Once you know the source of the inspection, get prepared for it. You will need a tape recorder, camera, possibly a video camera, pens and pads. Make sure you identify how the inspector will record the site so you can do so with the same instrument, photographs or videotape. If you are not good at taking notes, have someone else do it.

Advertisement

Creative Design Billboard

During the first conference discussion you can also determine what documents the inspector wants to see. In rare cases, such as when your risk manager is a new employee, the inspector will give you time to gather the requested documents.

Normally, inspectors want to see:

• OSHA 300 log and any associated OSHA 101 forms (first notice of injury)

• company hazard communication training program

Sign in or enable JavaScript to keep reading.

Advertisement

Prinoth Snow Measurement - Billboard