The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Mountains Don’t Move Themselves

Fall 1977 Issue

Rigging

Cat skinning and lift rigging have nothing in common, except that there’s more than one way to do both jobs. Any reasonably good rigger with a fair amount of imagination can look a job over, scrounge up a few blocks, chokers and clips, and do the work.

Method ‘A’ — rigging slack haul rope.

The trouble with this is that we often dip pretty deep into the safety factor, and every now and then someone “loses it.” This is not only dangerous to our best workmen, but can be damn costly — especially when detensioning of lifts is concerned.

There is the old standard way of picking a fairly flat spot someplace on the profile, kicking the rope off a few towers, dogging the rope off to a tower base and pulling straight away with a heavy piece of equipment. If you are simply rigging for a re-splice to shorten, and if the profile is suitable and the ground dry, this is probably the most expedient way to go. However, I maintain that pulling “straight off” with a Cat is a pretty rough and unrefined way to deal with a ski lift.

More From This Issue

Advertisement

MDMT – Card

Advertisement

Marketing B - Billboard