The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Mountains Don’t Move Themselves

September 1992 Issue

Top Or Bottom Drive

Cable-tension diagrams comparing top-drive/bottom-tension and bottom-drive/top-tension configurations for a hypothetical 2,400 pph quad chair (500 ft/min, 1,350 ft vertical rise, 3,450 ft slope length), showing tension (tons) for empty and full states.

Understanding the physical differences between installing a top drive versus a bottom drive of a lift helps in evaluating the actual cost differences and where they come from. The required equipment, installation and operating cost must all be considered to make a fair evaluation. As an example let’s look at a hypothetical quad chair with a capacity of 2,400 pph at a speed of 500 ft/min and assume the lift has a fixed drive station and a return tension station. The illustration diagrams cable tensions and technical information for both drive configurations.

Cable-tension diagrams comparing top-drive/bottom-tension and bottom-drive/top-tension configurations for a hypothetical 2,400 pph quad chair (500 ft/min, 1,350 ft vertical rise, 3,450 ft slope length), showing tension (tons) for empty and full states.
Cable-tension diagrams comparing top-drive/bottom-tension and bottom-drive/top-tension configurations for a hypothetical 2,400 pph quad chair (500 ft/min, 1,350 ft vertical rise, 3,450 ft slope length), showing tension (tons) for empty and full states.

Advertisement

Creative Design Billboard