The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Prinoth Connect Snow Measurement – Leaderboard

Fall 1977 Issue

Counterweights Need Watching Too

Are you taking your ski lift counterweight for granted? That innocuous looking block of concrete dangling precariously from a tension sheave mounting frame is a vital component in your lift system. When functioning as intended, it assures the proper operation of your tramway or lift; when its operation is impeded or negated, a costly and often dangerous condition may arise.

Aerial passenger tramway codes and standards (ANSI B77.1-1977 2.2.9.1) require that haul rope and track cable tension be regulated by a counterweight or other suitable device. The provision facilitates the design and assures proper operation by introducing and maintaining a known tension at a particular point in the system under all loading and operating conditions. Without this provision, the design becomes indeterminate and the operation may introduce excessively high or low tensions with potentially costly and dangerous consequences: overloaded bull wheel and line sheave bearings, excessively high line sheave pressures with rapid liner wear and the potential for cable lift-off at lightly loaded support towers, unduly low tension with the possibility of pulling away at depression sheaves, excessive cable deflection at carrier attachment points, and excessive oscillation of the haul rope.

Advertisement

MDMT – Card

Advertisement

Prinoth Snow Measurement - Billboard