The Voice of the Mountain Resort Industry  |  Est. 1962

Advertisement

Outside Is Where We Thrive – Summer

Summer 1979 Issue

Looking For Trouble

Editors Note: This is the second in a series of five articles being written about various types of Non-Destructive Testing (NDT) applicable to the ski industry. In our next issue of SAM, "Magnetic Particle" testing will be discussed.

NDT — Liquid Penetrant

Of the four most common non-destructive testing methods (liquid penetrant, magnetic particle, ultrasonics, and radiography), the “liquid penetrant” method is the most basic and least expensive. A typical three-part “kit” can be obtained for roughly $25 from automotive supply houses. Brand names such as “Spot Check” by Magnaflux and “Dubl-Check” by Sherwin are fairly well-known.

The objective of liquid penetrant testing is the detection of surface imperfections in welds, castings, and machined shapes in a rapid and economic manner. It is also required to satisfy a need for the testing of non-magnetic materials such as aluminum, some stainless steels, and magnesium.

Advertisement

Commerce A - Sidebar

Advertisement

Prinoth Snow Measurement - Billboard